After a very good coffee by “Juice” in the morning, I walked on over to the boat where I inspected second load of lead. It looked good and once the others came along we worked to get it out of the mold. Most of it was going to be cut up and put inside the bilge as extra ballast, but we needed one section cut and holed to go under the greenheart keel as the one the day before. Getting this load of lead out proved much more difficult and it took way too long before we managed to get it onto wood supports. Once it was out we had the same process of moving it, cutting it, putting holes in it, and finally attaching it. Once attached, it was quickly tarred and then coated with anti-fouling paint. While this was being done, work continued up on deck with painting, sanding and some minor wood work. The stainless steel bits that I brought down had to be attached to the stem to keel joint as well as the stern post keel joint. We worked hard all day on Friday and had the lead shoe properly in place by the end of it. Saturday morning we worked frantically on last minute finishing to get the boat floatable and looking worthy of a launch. 
We also hired a few village characters to help clean up the beach and surroundings so that the place could be somewhat presentable to the masses who would turn out to help the launch and join in the celebrations. I had to buy 21 cases of beer, some scotch, rum, a bottle of wine, two sheep, a pig and all the other smaller things we needed in order to throw a big launching party. 
Tradition is integral part of the boat building process in Carriacou and apart from sprinkling rum around the ground, blood had to be spilled on the deck, the day before a launch. 
I have to admit that I wasn’t interested in seeing any animals get slaughtered on or around the yacht, so I skipped that part. 
I did get photos of the blood on deck afterwards as the sun set. 
By the end of the day some beers were brought to the boat for the gang to enjoy and simply look at the vessel. She was beautiful and although the boat wasn’t totally finished, it was ready to be launched on Sunday as tradition mandates. 
On Sunday morning I woke up early and took this photo. As you can see from the opening photo, it was a lovely start to the day and although we had plenty of work to be done before the launch later in the day, I felt quite at ease with the level of accomplishment and the amount of work still ahead.
Luis, one of the guys working with us, had a small boat and helped us get a huge tree trunk from up the coast where the work on my other yacht has been put on hold. This was later going to be used to build the rudder. He also had to get some old utility poles which we would use to roll the boat into the water. Anyway, as work was being done that morning, the church service up the road came to an end. As has been the tradition for hundreds of years on launch day, the priest came down to bless the vessel with holy water and some prayers. That was an interesting process and I am glad that I was there to be part of it too. Shortly after the priest arrived, the parishioners followed. 
They assembled early around the vessel and while some sand, others played instruments. 
About 7 people all volunteering started cooking in huge pots. IT was going to be a massive feast. David took the ferry over from Grenada to help out and enjoy the feast too: 
The beers and coolers arrived and things started to get exciting. We had to dig a hole for a anchor pole in the ground as this would stop the vessel from going into the water too quickly once a rope had been attached to the stern. Four or five logs were cut from the forest to be used as supports for the vessel. 
In a process filled with tradition and ceremony, these supports would be slowly chopped down from the bottom in order to lay the boat on its port side atop the rollers. IT's called a chopdown:
To avoid any damage to the hull a “bilge board” as they called it was fastened to the hull at the exact spot where she would rest. 
Block and tackle with a huge anchor was set up in the sea in order to pull the vessel down the beach, 
but there was plenty of pushing too which made a huge difference.
People came out of the woodwork to join in the process and i saw why a party is part of the boat building tradition. 
“Juice” and his friends from church played lively pieces to keep the crowd’s mood up. 
Once she lay on her side, the vessel could get the final two pieces of greenheart keel put in front and behind the lead shoe. 
Once this was done we were ready to push her and pull her into the water. 
By 2 PM the yacht was resting on its keel and floating on its port side. 
The anchor was pulling too which meant that we couldn’t get her out far enough for her to properly float. A freighter skipper called “Cardinal” quickly went out to his boat and helped pull Ocean Nomad into deeper waters. The new boat was finally launched long after the first trees had been cut for her frames. Everyone was happy to see this yacht launched and despite many people thinking the boat would never be launched she sat there proud for all to see. 
It was a tough day and although we could rest and be happy, there was still plenty of work to be done for her to be ready to sail.
“Juice” and his friends from church played lively pieces to keep the crowd’s mood up. Once she lay on her side, the vessel could get the final two pieces of greenheart keel put in front and behind the lead shoe. Once this was done we were ready to push her and pull her into the water. By 2 PM the yacht was resting on its keel and floating on its port side. The anchor was pulling too which meant that we couldn’t get her out far enough for her to properly float. A freighter skipper called “Cardinal” quickly went out to his boat and helped pull Ocean Nomad into deeper waters. The new boat was finally launched long after the first trees had been cut for her frames. Everyone was happy to see this yacht launched and despite many people thinking the boat would never be launched she sat there proud for all to see. It was a tough day and although we could rest and be happy, there was still plenty of work to be done for her to be ready to sail. 
I had paid Alwyn to rush the finishing of this boat in order for us to be ready for Antigua Classic Yacht Regatta which starts April 17th. As I sat there looking at the guys working on the boat I had doubts about the possibility of meeting the deadline. A huge fire was heating bits and pieces of lead inside a mold on the beach. 
We still had no shoe under the greenheart keel and there was plenty of work still to be done. Despite the 7 guys working on the boat I worried we needed more time. After lunch we went over things that needed to be done still, and Alwyn assured me that the boat would be launched on Sunday.
His nice little house sat only 5 minutes walk from the boat and right across a little shop. It was a handy place to be staying and I slept well. Early the next morning I inspected the lead. 
It was going to be another long day of work as we had to remove the lead from the mold and set up another batch inside the mold. After quite a bit of heavy work we removed over a thousand pounds of lead from the mold and started loading it up again. 
The finished piece was marked and cut in two so that it could be fit under the keel. The mold had been borrowed from another boat builder in Petit Martinique which was only a few miles away and we still had to cut it a bit to make it fit our boat. 
For hours and hours I collected bits of lead and dropped them carefully into the mold. We made a huge fire under it and as the lead slowly melted and the level dropped I had to add more lead. Meanwhile the other guys painted and hurriedly worked on various jobs under the waterline. A template had to be made of the keel bolts so that holes could be made in the lead. 
The guys took some time making these holes and I think it could have been way quicker with proper tools. I had to off in search of a socket big enough for the nuts that would hold up the lead too. 
By the end of the day we were totally exhausted, but the boat was looking much more likely to be ready. One piece of lead was shaped, holed and positioned under the hull. 
The other set of lead was cleaned already and was cooling in the mold waiting to be pushed out the next day. 
The guys drove around most of the day on wednesday looking for new perfect waves, but mostly were unable to find them. Roddy and Nik found some good ones late wednesday afternoon near Eric Clapton's drug and alcohol rehab center, Crossroads. The waves on the far North side of Willouhby Bay were protected that day from the winds and were nice walls of double overhead green according to the boys. After wiping out on a good one, Roddy told me he was held down in full washing machine mode for what felt like minutes. A good thing he can hold his breath long!
As you can see i took a few snaps of Nik on this nice litte wave just before i jumped in myself. 
Later that day i returned with "Rabi", 
The waves looked huge when we got there, but once we were out we didn't get the waves we had hoped for. I spend more time waiting than anything else and only managed to get a few good ones. On one wave i took off a little late just before the wave broke and got thrown off the top as the lip came crashing down. Somehow i managed to fall right on top of the boar which had flipped over exposing its fin. Guess where i landed? The fin caught me just above the left hip. Its a good thing i am sporting a good set of love muscles at the moment otherwise i may have been impaled! 
After making sure i wasnt cut i took some time to rest and caught another wave or two. On my last wave i fell pretty hard and managed to break one of my fingers. That was the last straw... I was over this place. Why did i leave a good thing? To cheer me up and kill some of the pain, we decided to meet some of the 
This storm as seen in the satellite photo taken a short while ago has winds of over 60 mph in the middle making it almost hurricane strength. 
AS you can see from the swell maps, the usual east to west flowing Atlantic waves are being replaced by massive North to South long period swells which will stick around for a few days up until Easter Sunday. This photo below shows waves right now in the North Atlantic around the storm up to 30 feet!!!!!
All the surfers here have been going bananas since windguru.com first indicated that we were gonna get some. For whatever reason everything is lining up for the swell to be big. 4.9 meters means waves will be over 15 feet in open waters later this week. This photo shows what it will be like on thursday in the Atlantic.
North and West facing coastline that is not protected by barrier reef will get huge waves and there will probably be some beach erosion over the next few days too. I for one will be surfing most of the time and i think we will have to cancel trips. I just got a call from Wadadli Cats too who is thinking about cancelling tours tomorrow and on thursday. We will have to see. Tomorrow we will both be up checking conditions before the sun risies. Friday's forecast shows the waves getting smaller.
The strange thing about these "ground swells" as they are called is that they are mosly only dangerous when they get near shallow spots not protected by reef and dont have anything to do with winds here on the island. Out in the open they are like long swells and don't cap. I remember fishing one time when the waves were about 15 feet, but there was no wind. It was like being in a rolling and moving hillside. The fish didn't seem to mind which was cool and the surfers love it. Anyway, SUP or "stand up paddle" is the sport of choice for me and a few of my friends when its like this these days, and i will try to get some more pics of our sessions over the next few days. The last time we had good waves was back in Jan and there was no wind on them making them perfect for surfing. Nik seen in the opening shot was loving life back then. Tomorrow there should be winds of about 16 knots, so it will be a little more bumpy on the board. Last week we had a nice little SUP sunset session and i took along my camera. The MPEG movies are cute and show a nice sunset on the SUP. The area we paddled is Jolly Harbour to Jolly Beach. AS you can see, SUP isn't just about waves.
This boat had been a chain around the families neck for some time. A yacht which usually took 8 months to finish was sitting there as a tourist attraction well over two years after they had started. 
As I sat there snapping photos I could see change happening port and starboard. 
The cap rail was being finished and the cabin roof was being prepared. 
I wanted this boat finished within five weeks in time for the Antigua Classic Yacht Regatta held in the middle of April, and although Alwyn said it would be no problem when I told him the day before, I 
They probably had imagined the steps they would need to take in order to finish her several times and she sat there in her undignified and unfinished state. By early afternoon it was time to head back to town in order to catch the ferry. I told Alwyn, that he would need to hire extra hands in order to get it done in time and he said it would be no problem. 
I think he wanted it out of there sooner than anyone, so that he could focus on my other boat which I think will be one of the most beautiful yachts he has built yet. 
Sitting on the ferry going downwind back to Grenada I felt happy to have seen some of the process as well as to have helped Alwyn get Ocean Nomad back on track. That was February 20